Need an internal charge port to power your case-mounted mobile device ?
Plug this cable into the USB On-The-Go (OTG) port of the Bump Controller and get a standard USB charge port capable of supplying 500mA of power to your dedicated mobile device.
NOTE: Larger tablets (typically 9"+) may require more than 500mA to run continuously with the display on. If so, a separate dedicated USB power port adapter may be a better option.
NOTE2: All of our BumpCharger decks have a small slot on the back of the deck that allows a USB charge cable to exit the deck and route up along the right side of the center panel for powering a phone or tablet mounted in the center lid plate.
NOTE3: You must provide the appropriate charge cable to go from standard USB plug to whatever your mobile device requires.